The control period of each position is only 4 milliseconds, with a high control precision. Pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and servo motor. The DDCSV1 numerical control system adopts the ARM+FPGA design framework.
The ARM can finish the part of human-computer interface and code analysis and the FPGA can finish the part of underlying algorithm and control pulse generate, with the reasonable design, reliable control and easy operation. The panel layout structure of DDCSV1 is rational.The common off-line operation can be finished only by 17 keys and it supports the FANUC with high universality to be compatible with G code set. Ordinary digital input interface of 16-circuit optocoupler coupling isolation.
16 channel optocoupler common digital input interface. 3 channel optocoupler common digital output interface.1 channel, 0-10V spindle speed control analog output interface(which can be modified into PWM output). Support 4 channel stepper motor control, single channel maximum 500KHz control pulse output.
4.3 inch TFT screen, resolution 480272. 17 operation keys (one spare key, no definition). The main control equipment for 18V-32V power input, the current capacity is not less than 0.5A. Support U disk read G instruction, G instruction file size no requirements.
Equipped with hand and pulse interface, support the company's digital hand, while supporting the common hand in the market. The support panel key point and single axis manual operation.
Support for fast running position operation. Support for multi coordinate system (Automatically save after power off). Support save breakpoint function (run by the pause button to automatically save). 1, the offline system, run the U disc G code, without computer, without other control equipment.
2, control 4 stepper motor operation. 3, with 15 input interface, including the limit stop and other functions, to support the breakpoint continued carving. 4, with 4 programmable output interface, including water cooling, spray cooling and other controlled peripheral.
5, the spindle speed adjustment VSO mode (0-10V) dual mode. 6, independent design system software. 7, USB interface, support common U disk system.9, the highest 500K stepper motor control pulse output, suitable for most of the machine tool system needs. 10: support for standard hand pulse, control the feeling is like a hand twisting motor position. 11: support standard G code system, compatible with FANUC. 12: embedded case design, easy to install on any cabinet panel. 13: integrated power supply stability system, can fight the general spindle motor electromagnetic interference.
14: high speed output interface chip, provide enough current and pulse frequency signal output. 15:LPC industrial grade master control chip, improve system stability.Product appearance and di mensions. DDCSV1.1 using embedded shell structure, can make a square hole in the cabinet, and the device is embedded with a square hole, from the inside with 2 locking locking mechanism can be the device fixed on the cabinet, convenient installation. Product appearance size diagram, Figure 1-1 and figure 1-2. Product panel size is 163mm102mm5mm. The main body of the size of 156mm93mm45mm. The size of the cabinet is 156mm93mm. Presentation: 8G, high performance U disk , adapter power supply. 4 Axis DDCSV 4 Linkage Motion Offline Control System Controller USB Disk G Code. We believe our items are so outstanding. All products are quality checked. We will be happy to resolve any issues you may have in a cordial and friendly manner. The item "DDCSV1.1 CNC Control System USB 500KHz 4 Axis Motion Controller + MPG Handwheel" is in sale since Tuesday, August 23, 2016. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Other DIY Tools & Workshop Equipment". The seller is "sttee2" and is located in Shen Zhen. This item can be shipped worldwide.