The control part of the interface and electrical isolation. Up to 125K stepper motor control pulse output, suitable for most machine tool system needs.
Support standard hand pulse, serial digital display hand pulse, digital display hand control. With CNC controller, suitable for all kinds of small and medium sized automation equipment and instruments. 1 Performance parameter of the NCH02. 5 Axis, 3-5 Axis Optional. 2 2-4 Axis linear interpolation, any 2 axis circular interpolation.3 5 opto isolated digital outputs, 8 opto isolated digital inputs. 4 Analog spindle control 0-10V spindle control (can be modified as PWM output). 5 24VDC power input, minimum 1A.
6 3.5 inches TFT screen, resolution ratio: 480x272;19 user key. 7 Differential Pulse and direction output signal, Max. 8 USB flash disk support for G code file input. 9 The control system can preview the process path before machining, and it makes the system more steady, working smoothy and precise. 10 Support the Standard MPG or the NVMPG which Digital dream made.11 Acceleration/Deceleration Mode: S curve. 12 Support un-limited size file for machining. 14 Support the operation to Start a G code from a specific line. 15 Support for Power Cut recovery. 18 Supporting Homing, Go to Zero, workpiece origin position saving.
1.2 Appearance, Structure and Size of Product. The NCH02 motion controller contains the handheld motion controller, wiring board, and HDMI digital high-definition transmission cable.
The handheld motion controller and wiring board are communicated by 2 Meter 37 pins HDMI digital high-definition transmission cable which is shielding twisted-pair cable to avoid interference. 1.3 Explanation of Abbreviations. When operating the NCH02 Controller, the users will come across some English abbreviations. Here a list with explanations. FRO: Feed Rate Override SRO: Spindle Rate Override.
F: Feed rate, unit is mm/min. S: Spindle Speed, unit rev/min.
X: The coordinate code of the X axis. Y: The coordinate code of the Yaxis. Z: The coordinate code of the Z axis.
A: The coordinate code of the A axis. BUSY: The system is busy. You still can adjust FRO and SRO. READY: READY mode, any operation can be done.
RESET: Reset mode, controller is in OFF mode, no operation can be performed. CONT: Continuous mode, each axis can be manually jogged with the arrow keys Step :Manual Step Mode. Each axis can be jogged in defined steps.
Operate the machine with the MPG (Manual Pulse Generator) AUTO: Run G code. Auto is showing when file is processing. Wir testen alle unsere Waren und wählen beste für Sie. Verpassen Sie keine Angebote mehr! The item "EU-STOCK NCH-02 4 Axis CNC OFFLINE Controller Motion Handheld Pendant" is in sale since Sunday, February 21, 2021.
This item is in the category "Business & Industrie\Automation, Antriebe & Motoren\Elektromotoren\Schrittmotoren".eu" and is located in Freiburg.
This item can be shipped to all countries in Europe.