CNC 4 Axis Offline Stand Alone 500KHz Servo/Stepper Motor Motion Controller. CNC Motion controller (RMHV2.1). 1 x 8GB USB Flash Driver.
1 x USB Extension Cable. 1.1 Introduction of Product. The DDCSV1 is the 4 axis and 4 axes motion controller which has been researched and developed by Faster CNC for four years. The control period of each position is only 4 milliseconds, with a high control precision. The highest uniaxial output pulse is 500KHz and the pulse width can be adjusted.
It supports the common stepper motor and servo motor. The DDCSV1 numerical control system adopts the ARM+FPGA design framework. The ARM can finish the part of human-computer interface and code analysis and the FPGA can finish the part of underlying algorithm and control pulse generate, with the reasonable design, reliable control and easy operation. The panel layout structure of DDCSV1 is rational.The common off-line operation can be finished only by 17 keys and it supports the FANUC with high universality to be compatible with G code set. This specificationintroduces the operation method of caving machines special off-line CNC system, DDCSV1 and the machine tool connection as well as operation specification. By lots of graphical representation and examples, the uses can quickly learn to use the DDCSV1 CNC system. 1.2 Performance parameter of Product. Ordinary digital input interface of 16-circuitoptocoupler coupling isolation.
Ordinary digital input interface of 3-circuit optocoupler coupling isolation. Output interface of 0-10V spindle control port with analog quantity(can be modified as PWM output). Support the 4 axis stepper motor control, the highest control pulse output of single axis is 500KHz.
4.3 inches TFT screen, resolution ratio: 480272. The main control equipment is 18V-32V power input, the current capacity is required not to be lower than 0.5A. Support the USB flash disk to read the G code, and the size of G codefile has no requirement.
Be equipped with MPG port and support digital display MPG as well as support the general MPG in the market. Support the panel key with single-axis manual operation, manual step and CONToperation.
Support the operation of quickly specify the running position. Support the multi coordinate systems (with automatically saving function in case of power cut). Support the function of saving data automatically after power down (press the start to automatically save the data in the operation, automatically save the data after power down).If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). These charges are the buyers responsibility. EU, Ukraine, RU, USA clients very fast via. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. The item "EUCNC 4 Axis Offline Stand Alone 500KHz Servo/Stepper Motor Motion Controller" is in sale since Tuesday, July 21, 2020. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Other Automation Equipment".
The seller is "kuku2019" and is located in Frankfurt, . This item can be shipped to European Union member countries.