NCH02 can read the G file and run the G file. 8 ports photoelectric isolated input interface. 5 ports photoelectric isolated output interface.1 port 0-10V spindle speed analog output interface(can change to PWM output). Can support 5 axis stepper systems, 125KHz pulse output for every axis. Main device is 24VDC power supply input, current should higher than 1A.
Support standard MPG and NVMPG. The Hand control system NCH02 appearance as the Figure 1-1 show: The host system. NCD02 appearance as the Figure1-2. The Hand control system NCH02 overall size is 168mm108mm30mm. The host system DM100 overall size is 165mm105mm20mm.When operate the NCH02, where will be a lot of English abbreviation, now we list all of. Them for your kindly references.
FRO: Feeding adjust: During the operating process, the F value already set, and need to. Adjust the current feeding speed, then we can adjust FRO value to realize it. SRO: Spindle speed adjust: During the operating process, the S value already set, and need.
To adjust the current spindle speed, then we can adjust SRO value to realize it. During the operating process, as the manual speed already set, and we need to adjust the.Current speed, and impossible to fix the value during it is working , then we can revise the SRJ. Current manual speed FS#=Setting manual speedSRJ. F:Feedingspeed, the unit is mm/min. For example F=200, means every minute feeding. For example S=20000, means 20000 revolution/Minute.
In the mode we can do any operation, include processing or values. Modification or starting 2nd mode. In this mode, it should stop every operation. Every axis candonduct the manual step operation at this mode. Every axis can conduct the MPG operation at this mode.
The power supply solution in the field of the Industrial automation is always very. Complicated, there is a lot of the GND, now we descript the structure of the power supply as. The power supply structure as the Figure 2-1, main power supply input and MPG module and. Stepper control output module are common GND, Limited and Estop input module and Spindle. Speed adjust module are common GND, between main power supply and output module there are.
The inputs of limited switch and Estop and so on are Common cathode. Inside of the device, there is GND as common-, no need to connect external power supply.
On the reference of output GND interface, output a 0-10V adjustable voltage to adjust the spindle. The chassis is built with 220V to 48V DC supply to the DC brushless spindle and 4 step. Input interface such as limit origin. We will respond to you within 24 hours and do our best to help you out! Product within 30 days if the product is in unused condition.
Not only that, we like to know about your satisfaction rate. So, if you are happy with our products please be kind to rate our products giving 100% feedback because that small activity will help us to grow up. We are very happy to do business with your future too... When you start to use our products. The item "NCH02 CNC motion controller 3axis Handle engraving drilling & milling machine" is in sale since Friday, October 1, 2021.
This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Other Motor Controls". The seller is "siddana0" and is located in Shanghai. This item can be shipped worldwide.