XC809DD 4 Axis CNC Motion Controller 7 LCD For Carving Milling Drilling Tapping

XC809DD 4 Axis CNC Motion Controller 7 LCD For Carving Milling Drilling Tapping
XC809DD 4 Axis CNC Motion Controller 7 LCD For Carving Milling Drilling Tapping
XC809DD 4 Axis CNC Motion Controller 7 LCD For Carving Milling Drilling Tapping
XC809DD 4 Axis CNC Motion Controller 7 LCD For Carving Milling Drilling Tapping
XC809DD 4 Axis CNC Motion Controller 7 LCD For Carving Milling Drilling Tapping
XC809DD 4 Axis CNC Motion Controller 7 LCD For Carving Milling Drilling Tapping

XC809DD 4 Axis CNC Motion Controller 7 LCD For Carving Milling Drilling Tapping

XC809DD 4 Axis CNC Motion Controller System w/ 7 Color LCD For Carving Milling Drilling Tapping System Introduction: It is a new generation multifunctional CNC system for engraving, milling, drilling and tapping. Support carving, milling, drilling and tapping. A 32-bit high-performance microprocessor, real-time multi-task control technology and hardware interpolation technology, full linkage, high-speed small segment forward-looking algorithm are used. It features 0.001 mm interpolation accuracy, the highest speed of 30 m/min. It is the best choice for engraving machine, small processing center, CNC milling machine and CNC drilling machine.

Software & Hardware Characteristics: â?? Based on 32-bit microprocessor, full linkage, 0.001 mm interpolation accuracy, maximum speed 30 m/min, support direction + pulse and orthogonal pulse. It adopts 7-inch color wide screen LCD with resolution of 800 x 480 and interface style for Windows. Equipped with 8 soft function keys, it is simple and easy to learn and operate. Provides rich display interfaces such as parameter classification, alarm log, system diagnosis, etc.

To facilitate debugging and maintenance. International standard G instruction, compatible with system instruction for FANUC. 40 Kinds of G instructions support drilling and tapping cycles.

Full-screen editing of parts program, built-in 512M mass program space, can store N parts program. Has USB interface, supports U disk file reading and writing, data backup. Input 24 (expandable to 96) points, output 24 (expandable to 96) points (customized), flexible and convenient. Chinese and English operation interface, complete help information, more convenient operation. The system adopts acceleration and deceleration control before interpolation.

Support long and radius cutter patches. Supporting hand wheel trial processing, facilitating program debugging.

Supports multi-level operation authority, facilitates equipment management, and has time-limited system locking function. Support for UG, Mastercam, PowerMill, Feature CAM, ArtCAM, JDPaint, Wentai and other third-party software G code files. Support self-programming tool library, flexible use of a variety of tool libraries. Technical Specifications: Basic Functions: - Number of control axes: XC809DC, 3-axis; XC809DD 4-axis; XC809DE 5-axis; XC809DF 6-axis; - Number of linkage axes: Full linkage - Tool library: Support, need to edit tool library code - Spindle: 2-way analog spindle, in which spindle 1 can use digital spindle (occupying a digital spindle) - Spindle monitoring: With - Minimum instruction unit: 0.001 mm - Maximum instruction value: ±99999999 x minimum instruction unit - Fast feed speed: 30,000 mm/min - Fast feed rate: F0, 25%, 50%, 75%, 100% - Pulse mode: 1: Direction + Pulse 2: Orthogonal Pulse (recommended, anti-jamming stronger if driver supports) - Maximum frequency: 100Khz, 200Khz, 500KHz can be set.

(500KHz can only be achieved in all orthogonal output modes of axes) - Feed rate multiplier: 0-150% - Electronic gear ratio: 1-65535:1-65535 - Automatic acceleration and deceleration: With - Prospective algorithm for high-speed small segment: With - Handwheel Trial Processing: With - Location: G00 (Linear Interpolation Location) - Interpolation: straight line (G01), arc (G02/G03/G12), helix interpolation - Return Reference Point: Automatically Return Reference Point (G28) - LCD: 7-inch TFT LCD screen with resolution of 800 x 480 - MDI Software Key: 8pcs - Single step: x1, x10, X100 - Communication interface: U disk interface - External handwheel interface: With - I/O Interface: 24/24 (Extensible to 96/96) - Pause (seconds): With - Quasi-stop state: With - Quasi stop: With - Storage Travel Check: With - MDI running: With, it supports multiple runs. Reset: With - Jump switch: With - Single-stage operation - Program protection switch: With - Self-diagnostic function: With - Emergency stop: With - Power supply: single phase AC220V+10%-15%, 50Hz+1Hz - Coordinate System: Machine Tool Coordinate System (G53), Workpiece Coordinate System (G92, G54-G59), Local Coordinate System (G52), Plane Designation of Coordinate System - Automatic coordinate system setting: With - Decimal point input: With Auxiliary Function: - Auxiliary functions: M2 digits, M code customization, manual/MDI/automatic control of spindle forward, reverse and stop; control of coolant start and stop; control of lubrication start and stop, etc.

Spindle Function: - Spindle function: Dual-spindle - Digital spindle: Spindle 1 supported, occupy one-way digital axis (Z axis does not support), the speed is more stable - Tapping: Support - Spindle analog output: With, dual-spindle Tool Function: - Tool function: support automatic tool change, support split-centered tool, three-point centered tool alignment - Tool Compensation Memories - 9999.999 to 9999.999, 99pcs - Tool Compensation, Length Tool Compensation and Radius Tool Compensation Editing Operation: - Editorial Functions: Parameters, Diagnostic Bit Input, Program Editing, MDI Multi-segment Execution - Storage capacity: 512M - Number of stored programs: 500pcs - Display of Program Names: Chinese, English, Numbers and Combinations - Procedure line lookup: With - Skip the optional procedure section: With - Program switch: With Display: - Display: Chinese, English - Display processing time, number of parts: Yes - Spindle speed, M/S instruction: With Host Size (mm): - Dimensions: 390 x 253 x 80mm/15.4 x 10 x 3.1" (HxWxT) - Opening Size: 370 x 228mm/14.6 x 9" (HxW) Package Included: - 1 x CNC Control System. Usually it cost about 35USD-50USD. If you receive defective item, please kindly notify us within 14 days.

The item "XC809DD 4 Axis CNC Motion Controller 7 LCD For Carving Milling Drilling Tapping" is in sale since Thursday, November 26, 2020. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Stepper Controls & Drives". The seller is "topcyberday" and is located in Shenzhen. This item can be shipped worldwide.


XC809DD 4 Axis CNC Motion Controller 7 LCD For Carving Milling Drilling Tapping


Homepage   Sitemap   Contact Us   Privacy Policy Agreement   Service Agreement