We send by DHL packet, with one day handle time. These below EU countries are free VAT. DDCS V3.1 CNC Offline Controller.
DDCS V3.1 Controller Brief Introduction. 1.1 Introduction of Product.The DDCS is a 34 axis motion controller for stepper and servo systems. The highest output pulse per axis is 500KHz. This provides high control precision for stepper motors and servo motors. The DDCS numerical control system adopts the ARM+FPGA design framework. ARM controls the human-computer interface and code analysis and the FPGA provides the underlying algorithms and creates the control pulse. This guarantees reliable control and easy operation. The internal operating system is Linux based.
The panel layout structure of the DDCS V3.1 is very rational to save space. All operations are controlled by only 17 keys and a comprehensive G code set is supported. The DDCS can be used for many styles and types of CNC machines.Lathes, Routers, Pick&- Place and Mills are just a few examples. The DDCS operates as a Stand Alone system without the need of a computer.
This guarantees high precision, accuracy and reliability. The interface, even very comprehensive, can be learned in a very short time. 1.2 DDCS V3.1 Brief technical feature. 1 16 photoelectric isolated digital inputs, 3 photoelectric isolated digital outputs. 2 3.1 Version enhenced Algorithm, support soft interpolation, fixed arc interpolation bug of the old version.3 Analog spindle control 0-10V spindle control (can be modified as PWM output). 4 3-4 axis motor Control. Differential Pulse and direction output signal, Max. 5 ARM9 main control chip, FPGA core algorithm chip. 6 5 inches TFT screen, resolution ratio: 480x272,17 operation keys. 7 The Power Supply for the controller is 24VDC, minimum Current is 0.5A. 9 USB flash disk support for G code file input, no size limited of the G-code file. 11 Jog function for each axis (continuous, step, defined distance);Customer can define the distance.
12 Support the operation of quickly specify the running position. 13 Support for Power Cut recovery. 14 The controller only support NPN type limited switch. 1.3 Appearance, Structure and Size of Product.
The DDCS V3.1 is a small box that can fit in a window of a small control box or control cabinet. Four locking hooks fix this controller from the frame.
The dimension you find in picture 1-1 and picture 1-2. The front panel is 191mm128mm5mm The main body is 191mm128mm37mm To mount the unit in an equipment cabinet, cut the hole182.5mm59mm. When operating the DDCS, the users will come across some English abbreviations. Here a list with explanations.
F: Feed rate, unit is mm/min. S: Spindle Speed, unit rev/min.
X: The coordinate code of the X axis. Y: The coordinate code of the Y axis. Z: The coordinate code of the Z axis.A: The coordinate code of the A axis. BUSY: The system is busy. You still can adjust FRO and SRO. READY: READY mode, any operation can be done.
RESET: Reset mode, controller is in OFF mode, no operation can be performed. CONT: Continuous mode, each axis can be manually jogged with the arrow keys. Step :Manual Step Modeeach axis can be jogged in defined steps.Operate the machine with the MPG (Manual Pulse Gener ator). Auto is showing when file is processing. All Wiring isolated from MPG unit and provide a easy to install wiring diagram, it suit both commercial machine as a replacement jog control unit or other computer based controller. Which add great control flexibility to the system.
X, Y, Z, 4th axis selector switch. 6ft extendable high quality shielded cable cord.
Magnetic base holder can place anywhere on the machine steel surface. Required 5V+, 150mA, power for MPG. Phase output is A , /A and B, /B. TTL output, drive capability +-20mA.Support CNC system:Taiwan Pou Yuen M600 M500 M520i T300 series, Higerman, HANUC, GSK, opened NC, KND, Siemens, the NUM, Spain FAGOR (NEW, 8055I) and so on. Wiring:User can wire this unit to the CNC system with easy. Please give us the opportunityto resolve any problem when you have, we concern your problem and we will try our best to resolve it.
When you have the parcel, and not satisfied the goods or it is other problem like as broken, pls tell us the detail reason and provide the photos. Welcome worldwide customer inquire and questions.
The item "EU4-Axis DDCS V3.1 Standalone Motion Offline CNC Controller TFT+MPG Handwheel" is in sale since Thursday, June 11, 2020. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Other Motor Controls". The seller is "kuku081" and is located in Frankfurt. This item can be shipped to European Union member countries.