Support spindle speed feedback - Support 3 meter USB cable - Supports Up 6-axis - Maximum step-pulse frequency is 2000KHz. Status indicator LED can be useful to show the USB - Connection, and working status by flashing. 16 general-purpose input, 8 output has speed function, the spindle actural speed Mach3 - Interface in real-time display - All IO-port isolation, interference, stable performance - Ful support for USB hot-swappable, the card is Monitoring USB connection status at any time, Key feature: 1. Standard usb device and work at all windows with usb hot plug.
The card state is monitored. Support 6 axis to motion at the same time. Step Pulse frequncy Up to 2000khzsupport servo and step motor driver. The usb state indication with led 6. All io is isolated, anti-noise and stable performance 7.
Spindle control with PWM and step/pulse 8. Aluminum shell, shield the interference. Power off and continue function Software installation: - First, install Mach3 software to your PC. Second, copy your driver into Mach3.
Check readme file in the CD. Check our wiring for reference, connect our card to your machine correctly.Connect your PC to our card by using network cable. After these steps, you can open your Mach3 software for operating. Please take a look at Mach3 software parameters setting, steps per and so on in the printed manual of our packing box for reference. Package List: - 1 x MKX-V motion card - 1 x Use wire - 1 x Driver disk - 1 x MACH3-USB trouble shooting - 1 x MACH3 config and driver installation - 1 x MKX V user Manual.
Usually it cost about 35USD-50USD. The item "Upgrade CNC Mach3 USB 4 Axis Motion Control Card Breakout Board 2MHz MK4-V" is in sale since Friday, September 28, 2018. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Stepper Controls & Drives". The seller is "thefineshop" and is located in . This item can be shipped worldwide.